We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177357
Description
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | 1-14 UNF |
Stroke | 203.2 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/2 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480177357, reach FAMAGA, the world's central retailer of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of products and private attention to each purchaser. We admire everyone, who cooperated with us - hence, our regular consumers obtain the most beneficial purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly form new agreements. More than 750 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Burundi, Thailand, Dominican Republic, Cuba, Japan, Bahamas, Brazil, East Timor, Equatorial Guinea, Grenada, Russia, Lebanon, Samoa, Benin, Saudi Arabia, Liberia, Ireland, Libya, Serbia, Poland, Albania, Suriname, Nepal, China, Lithuania, Guyana, Nicaragua, Bolivia, Fiji, Norway, The Gambia, Mexico, Afghanistan, Haiti, Cyprus, Yemen, Madagascar, El Salvador, Seychelles, Burkina Faso, Kuwait, Estonia, Philippines, Malta. A well-shaped logistics network and a partnership network guide us to ship our elements anywhere in the planet immediately without disreputing product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that users choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as keep on top of it.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |