We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480142910
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480142910, reach FAMAGA, the world's dominant producer of streamlined equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each buyer. We admire everyone, who worked with us - thus, our regular clients get the most desirable purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4500 such customers, and we constantly make new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Angola, Kuwait, Congo, France, Liberia, Myanmar, Guatemala, Sudan, Costa Rica, Romania, Belize, Honduras, Greece, Argentina, Netherlands, Monaco, Brazil, Comoros, Mongolia, Kyrgyzstan, Zambia, Uruguay, Australia, India, Samoa, Turkmenistan, Liechtenstein, Ukraine, Azerbaijan, Switzerland, Antigua and Barbuda, Austria, Kazakhstan, Iraq, Denmark, Turkey, Montenegro, Burundi, Libya, Israel, Iran, Nigeria, Malta, Croatia. A well-elaborated logistics chains and a partnership network assist us to deliver our items anywhere in the earth promptly without disreputing product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this number is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as keep on top of it.
To get some advice or place an order, contact us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |