We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822233002
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822233002, contact FAMAGA, the world's central supplier of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are described in the quality of products and private attention to each client. We appreciate everyone, who engaged with us - therefore, our regular consumers pick up the most attractive purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly sign new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Afghanistan, Bhutan, Mongolia, Grenada, Ukraine, Ireland, Paraguay, Pakistan, Jordan, Saudi Arabia, Egypt, Belarus, Guinea, Djibouti, Singapore, Cameroon, Netherlands, Iceland, Estonia, Algeria, Uzbekistan, Rwanda, Kyrgyzstan, Bangladesh, Czech Republic, Dominica, Chile, Ghana, Kiribati, Cape Verde, South Korea, Australia, Samoa, Laos, Austria, Armenia, Togo, Moldova, Sierra Leone, Senegal, Yemen. A well-elaborated logistics link and a partnership network allow us to dispatch our products anywhere in the world as soon as possible without discrediting product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, phone us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |