We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822493200
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822493200, connect FAMAGA, the world's dominant provider of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are illustrated in the quality of merchandises and personalseparate attention to each buyer. We praise everyone, who collaborated with us - therefore, our regular customers get the most beneficial purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such customers, and we constantly compose new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Indonesia, Saudi Arabia, Lithuania, Chad, India, Mauritania, Ghana, United States, Cameroon, Gambia, Burkina Faso, Poland, Malawi, Estonia, Netherlands, Tonga, The Bahamas, Zambia, Peru, Bosnia and Herzegovina, Azerbaijan, Libya, Paraguay, Algeria, Austria, Mauritius, Rwanda, Senegal, Nigeria, Serbia, Seychelles, Central African Republic, Benin, Greece, Montenegro, Mongolia, Cape Verde, Slovakia, Georgia, Iran, Nepal. A advanced logistics system and a partnership network allow us to deliver our products anywhere in the globe as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, phone us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |