We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822330405
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822330405, call FAMAGA, the world's leading company of mechanized equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of items and particular attention to each orderer. We cherish everyone, who liased with us - thus, our regular consumers get the most favorable purchase forms and discounts on the manufacturing equipment market. Today, there are more than 3500 such consumers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Uganda, El Salvador, Dominican Republic, Belarus, Angola, Botswana, Kazakhstan, Sweden, Czech Republic, Bolivia, Georgia, Montenegro, Senegal, Argentina, Burundi, China, Tunisia, Mauritania, Niger, Malaysia, Azerbaijan, Kuwait, Fiji, Nepal, Belize, Morocco, Brunei, East Timor, United States, Brazil, Thailand, Russia, Kyrgyzstan, Burkina Faso, Dominica, Guatemala, Namibia, Afghanistan, Norway, Haiti, Iraq. A well-elaborated logistics series and a partnership network help us to ship our goods anywhere in the earth on-time without discrediting product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of industrial equipment.
All items from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are happy that customers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |