We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R412019839 (SSI-DA-032-0050-4-02-2-000-000) AVENTICS - Kurzhubzylinder, Serie SSI
Part number
R412019839
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412019839 (SSI-DA-032-0050-4-02-2-000-000) AVENTICS - Kurzhubzylinder, Serie SSI R412019839, communicate with FAMAGA, the world's primary producer of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are represented in the quality of spare parts and special attention to each consumer. We cherish everyone, who conspired with us - thus, our regular purchasers obtain the most favorable purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such purchasers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Barbados, Guinea, Austria, Andorra, Hungary, Nepal, Sierra Leone, Brunei, Mongolia, Eswatini, Suriname, Grenada, Dominica, South Korea, Qatar, Lithuania, United Arab Emirates, Paraguay, Seychelles, Ukraine, Philippines, Sudan, Cameroon, Equatorial Guinea, Malaysia, Algeria, Central African Republic, Fiji, Rwanda, Mozambique, Jordan, East Timor, Indonesia, Kazakhstan, Bosnia and Herzegovina, Czech Republic, Burkina Faso, Iran, Luxembourg, North Korea, Tonga. A well-developed logistics link and a partnership network guide us to dispatch our goods anywhere in the planet on-time without damaging product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of manufacturing equipment.
All goods from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To ask a question or make a request, contact us or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |