We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226635000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5226635000, reach FAMAGA, the world's central vendor of machine made equipment. Our company has operated for more than ten years - these are cycles of experience, which are portrayed in the quality of outputs and personalseparate attention to each purchaser. We understand everyone, who engaged with us - therefore, our regular consumers obtain the most attractive purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly make new agreements. More than 600 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, France, Iran, Kiribati, Kazakhstan, Costa Rica, Bhutan, Dominica, Moldova, Armenia, Zimbabwe, Lebanon, Madagascar, Djibouti, Slovakia, Estonia, Thailand, Yemen, Laos, Switzerland, Uzbekistan, Norway, Liechtenstein, Togo, Ecuador, Bosnia and Herzegovina, Philippines, Montenegro, Brunei, Denmark, Belize, Sweden, Australia, Malaysia, Senegal, Latvia, Equatorial Guinea, Benin, Ukraine, Macedonia. A advanced logistics bond and a partnership network cheer us to deliver our goods anywhere in the world promptly without undermining product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that users choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, phone us or write to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |