We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226634700
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 70 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5226634700, reach FAMAGA, the world's major distributor of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are described in the quality of items and special attention to each customer. We cherish everyone, who cooperated with us - thus, our regular buyers procure the most attractive purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 3500 such customers, and we constantly sign new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, South Africa, United Arab Emirates, Greece, Mexico, Kenya, Kuwait, Bosnia and Herzegovina, Morocco, India, Madagascar, Senegal, Samoa, Tajikistan, Netherlands, Costa Rica, Estonia, Hungary, Finland, Bhutan, Georgia, Chad, Sweden, Dominica, Pakistan, Latvia, Ireland, Zimbabwe, Haiti, Israel, Botswana, Namibia, Guatemala, Togo, Niger, Vietnam, Albania, Fiji, Belize, Nigeria, Burkina Faso, Eswatini, Cyprus, United States, Malaysia, Cameroon, Luxembourg, Suriname, Seychelles, Paraguay. A well-built logistics system and a partnership network let us to send our items anywhere in the planet quickly without damaging product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is rising every day. We are proud that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To inquire or make a request, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |