We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226634600
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 60 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5226634600, make contact with FAMAGA, the world's the best supplier of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and individual attention to each buyer. We admire everyone, who joined with us - thus, our regular customers pick up the most beneficial purchase conditions and discounts on the industrial equipment market. At present, there are more than 3500 such clients, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Cameroon, Comoros, Uganda, Romania, Kazakhstan, Croatia, Nicaragua, Senegal, Eritrea, Dominica, Andorra, Luxembourg, Swaziland, Colombia, Sweden, Kiribati, Egypt, North Korea, Syria, South Sudan, Haiti, Djibouti, Macedonia, Monaco, East Timor, Sudan, Zimbabwe, Madagascar, Sierra Leone, Mexico, Suriname, Pakistan, Argentina, Thailand, El Salvador, Libya, Mozambique, Costa Rica, South Korea, Chile, Kuwait, Iceland, Qatar, Panama. A well-elaborated logistics connection and a partnership network allow us to deliver our units anywhere in the planet as soon as possible without disreputing product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is increasing every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as stay in control.
To request or book, call us by phone or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |