We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480170786
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480170786, contact FAMAGA, the world's leading company of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each customer. We respect everyone, who engaged with us - so, our regular customers receive the most desirable purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such buyers, and we constantly sign new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Cape Verde, Central African Republic, Congo, Antigua and Barbuda, East Timor, Nigeria, Denmark, Zimbabwe, Tunisia, Burma, Peru, Chile, Bosnia and Herzegovina, Bhutan, Ireland, Bulgaria, Turkmenistan, Malawi, Luxembourg, The Bahamas, Tanzania, Moldova, United States, Burundi, Philippines, Equatorial Guinea, Uganda, Russia, Libya, Afghanistan, North Korea, Azerbaijan, Kenya, Sweden, New Zealand, Cyprus, Iran, Yemen, Jordan, Belarus, Mongolia, Zambia. A well-built logistics link and a partnership network let us to send our products anywhere in the earth promptly without damaging product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this amount is rising every day. We are glad that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or order, phone us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |