We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822345910
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822345910, reach FAMAGA, the world's central vendor of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and particular attention to each client. We cherish everyone, who worked with us - so, our regular clients receive the most flexible purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 3500 such customers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Guinea, Laos, Kyrgyzstan, Sierra Leone, Argentina, Congo, Belgium, Bosnia and Herzegovina, Papua New Guinea, Ecuador, Eswatini, Azerbaijan, Denmark, Greece, Central African Republic, Singapore, Antigua and Barbuda, Suriname, Turkmenistan, Ukraine, Monaco, Austria, Libya, Algeria, Uzbekistan, Fiji, Mauritius, Hungary, Belize, Bangladesh, Tonga, Turkey, Senegal, Cameroon, Bulgaria, Ghana, Iraq, Niger, Nigeria, Peru. A well-built logistics bond and a partnership network cheer us to conduct our items anywhere in the globe quickly without discrediting product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, get in touch with us or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Trunnion mounting | Nodular graphite iron, galvanized |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |