We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480148066
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480148066, connect FAMAGA, the world's the best vendor of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of products and particular attention to each buyer. We understand everyone, who joined with us - thus, our regular buyers procure the most flexible purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Cuba, Kiribati, Egypt, Libya, Mauritius, Pakistan, Lesotho, Chad, Belarus, Palestine, Montenegro, El Salvador, Haiti, Iran, Bolivia, Brazil, Luxembourg, Iraq, Uganda, Panama, Sierra Leone, Monaco, Lithuania, Central African Republic, Russia, Uruguay, Antigua and Barbuda, Equatorial Guinea, Cyprus, Uzbekistan, Norway, Bosnia and Herzegovina, Malaysia, Thailand, Suriname, India, Denmark, Mali, Samoa, Cameroon, Tunisia, Iceland, Dominica, Kazakhstan, Bulgaria. A well-shaped logistics chains and a partnership network allow us to ship our items anywhere in the earth promptly without undermining product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or book, contact us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |