Aventics (brand of Emerson) 0822033209
  Aventics (brand of Emerson) 0822033209

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822033209 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822033209

Description

Functional principle double-acting
Cushioning elastic
Piston diameter 20 mm
Piston rod thread M8
Standardization ISO 6432
Stroke 250 mm
Sealing material Acrylonitrile butadiene rubber,Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822033209

If you are questing Aventics (brand of Emerson) 0822033209, call FAMAGA, the world's the best producer of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of items and special attention to each consumer. We admire everyone, who collaborated with us - thus, our regular consumers get the most flexible purchase forms and discounts on the manufacturing equipment market. Today, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the globe . A well-elaborated logistics system and a partnership network cheer us to send our goods anywhere in the earth on-time without discrediting product quality.

A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of industrial equipment.

All items from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.

To get some advice or order, contact us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.

Features 0822033209

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Stainless steel
Piston rod Stainless steel
Piston Brass, Aluminum
Front cover Aluminum, anodized
End cover Aluminum, anodized
Seal Acrylonitrile butadiene rubber Polyurethane
Nut for cylinder mounting Steel, galvanized
Nut for piston rod Steel, galvanized
Scraper Polyurethane