We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402001018
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Stroke | 35 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R402001018, make contact with FAMAGA, the world's top provider of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of goods and special attention to each buyer. We appreciate everyone, who conspired with us - therefore, our regular purchasers get the most helpful purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Chad, Senegal, India, Netherlands, Cape Verde, Eswatini, Cuba, Denmark, Liechtenstein, Israel, Czech Republic, Kenya, Eritrea, Indonesia, Brazil, Singapore, Liberia, Kazakhstan, Grenada, Norway, Algeria, Iran, Fiji, Uruguay, Bosnia and Herzegovina, Togo, Antigua and Barbuda, North Korea, Serbia, Ecuador, Cameroon, Australia, Moldova, Syria, Rwanda, Kyrgyzstan, Sudan, Niger, Laos, Benin. A well-built logistics chains and a partnership network allow us to send our goods anywhere in the world promptly without disreputing product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the field of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or book, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |