We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822490302
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822490302, get in touch with FAMAGA, the world's main producer of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of spare parts and individual attention to each consumer. We understand everyone, who worked with us - thus, our regular clients obtain the most acceptable purchase forms and discounts on the industrial equipment market. Today, there are more than 3500 such clients, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Guyana, Nepal, Serbia, San Marino, Uzbekistan, Mongolia, Bolivia, Switzerland, El Salvador, Seychelles, Afghanistan, China, Belgium, Gambia, Thailand, Belarus, Chad, Brunei, Japan, Djibouti, Eritrea, Sweden, Burundi, East Timor, Nicaragua, Armenia, Croatia, Panama, Lithuania, The Gambia, Qatar, Dominica, Mauritania, Algeria, Comoros, Mexico, Zimbabwe, Burkina Faso, Pakistan, Niger. A well-shaped logistics chains and a partnership network guide us to conduct our goods anywhere in the world on-time without damaging product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To inquire or book, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |