We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822490102
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M4 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822490102, contact FAMAGA, the world's principle supplier of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of products and personalseparate attention to each client. We respect everyone, who cooperated with us - therefore, our regular consumers receive the most helpful purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such consumers, and we constantly sign new agreements. More than 750 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Turkmenistan, Australia, Mongolia, South Africa, Guyana, Peru, Ukraine, Kenya, Burundi, Libya, Kazakhstan, India, Colombia, The Bahamas, Kuwait, Hungary, Japan, Senegal, Liberia, Kiribati, Saudi Arabia, Central African Republic, Angola, Sudan, Liechtenstein, Estonia, North Korea, Eswatini, Samoa, Antigua and Barbuda, Andorra, Uganda, Chile, Haiti, Paraguay, Austria, Sierra Leone, Israel, Mali, Egypt. A well-elaborated logistics network and a partnership network let us to deliver our elements anywhere in the globe promptly without discrediting product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, get in touch with us or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |