We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822080205
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822080205, call FAMAGA, the world's key provider of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are symbolized in the quality of goods and personalseparate attention to each consumer. We praise everyone, who collaborated with us - so, our regular clients get the most desirable purchase terms and discounts on the industrial equipment market. Now, there are more than 3500 such customers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Djibouti, Dominican Republic, Afghanistan, Nicaragua, Macedonia, Grenada, Kazakhstan, Burkina Faso, Belarus, Serbia, Zimbabwe, Palestine, Mozambique, Cameroon, Ukraine, Monaco, Syria, Norway, Liberia, Switzerland, Tunisia, Poland, Georgia, Mongolia, Malaysia, Libya, Botswana, Guatemala, Bulgaria, Albania, United States, Fiji, United Arab Emirates, Dominica, China, Tajikistan, Burundi, Luxembourg, East Timor, Yemen, Uruguay. A well-developed logistics bond and a partnership network guide us to deliver our products anywhere in the globe on-time without undermining product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To inquire or place an order, contact us or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |