We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822490301
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 10 mm |
Sealing material | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822490301, communicate with FAMAGA, the world's dominant provider of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are described in the quality of products and particular attention to each buyer. We respect everyone, who collaborated with us - therefore, our regular purchasers receive the most attractive purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Mongolia, Lebanon, Turkey, Jordan, Serbia, The Bahamas, Swaziland, Paraguay, Libya, Mali, Colombia, Singapore, Ghana, Panama, Luxembourg, Ecuador, Sierra Leone, Cape Verde, South Sudan, Armenia, Cyprus, Kazakhstan, Andorra, Botswana, Norway, Indonesia, Slovakia, Rwanda, Morocco, Argentina, Hungary, Antigua and Barbuda, Kiribati, Iraq, Laos, Cameroon, Croatia, Greece, Bosnia and Herzegovina, Uruguay, Costa Rica. A well-built logistics system and a partnership network cheer us to ship our products anywhere in the globe as soon as possible without disreputing product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |