We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226644400
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 40 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5226644400, get in touch with FAMAGA, the world's foremost company of manufacturing equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of outputs and private attention to each orderer. We respect everyone, who collaborated with us - therefore, our regular customers accept the most acceptable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such clients, and we constantly form new agreements. More than 650 purchases are terminated per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Panama, Thailand, Lesotho, Spain, Liberia, Norway, Austria, Cameroon, France, Iran, Denmark, Argentina, Burma, El Salvador, Guinea, Greece, Jordan, Australia, Burkina Faso, Hungary, Latvia, Niger, Uganda, Turkmenistan, Turkey, Nicaragua, Paraguay, Yemen, Macedonia, Brazil, Kenya, Mozambique, Iceland, Laos, Kazakhstan, Armenia, Eswatini, China. A well-built logistics chains and a partnership network guide us to deliver our goods anywhere in the earth promptly without disreputing product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or book, contact us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |