We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822332502
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822332502, make contact with FAMAGA, the world's primary provider of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each user. We praise everyone, who worked with us - hence, our regular consumers get the most convenient purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4500 such purchasers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Uganda, Jamaica, Peru, Poland, Mauritius, Jordan, Kuwait, Nicaragua, Honduras, Ukraine, Dominica, Bhutan, Ireland, Montenegro, Guatemala, Malawi, Brunei, Monaco, Laos, Qatar, Andorra, Guyana, Cape Verde, Malaysia, Brazil, Comoros, Samoa, Paraguay, Estonia, Zimbabwe, United Arab Emirates, Costa Rica, Luxembourg, Georgia, Malta, Pakistan, Antigua and Barbuda, Syria, Bosnia and Herzegovina. A well-built logistics bond and a partnership network assist us to dispatch our units anywhere in the world promptly without compromising product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are happy that purchasers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To request or book, phone us or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |