Aventics (brand of Emerson) 0822034202
  Aventics (brand of Emerson) 0822034202

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822034202 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822034202

Description

Functional principle double-acting
Cushioning elastic
Piston diameter 25 mm
Piston rod thread M10x1,25
Standardization ISO 6432
Stroke 25 mm
Sealing material Acrylonitrile butadiene rubber,Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

Expected within 5 days

66.8 €

Need cheaper?

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822034202

If you are pursuing Aventics (brand of Emerson) 0822034202, get in touch with FAMAGA, the world's foremost provider of industrial equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of spare parts and particular attention to each buyer. We admire everyone, who engaged with us - thus, our regular clients pick up the most flexible purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such clients, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the globe . A well-shaped logistics link and a partnership network allow us to ship our units anywhere in the earth as soon as possible without damaging product quality.

A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of industrial equipment.

All outcomes from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.

To inquire or book, contact us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 0822034202

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Stainless steel
Piston rod Stainless steel
Piston Brass, Aluminum
Front cover Aluminum, anodized
End cover Aluminum, anodized
Seal Acrylonitrile butadiene rubber Polyurethane
Nut for cylinder mounting Steel, galvanized
Nut for piston rod Steel, galvanized
Scraper Polyurethane