We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822063139
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Stroke | 200 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822063139, reach FAMAGA, the world's top company of manufacturing equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of spare parts and individual attention to each buyer. We admire everyone, who collaborated with us - therefore, our regular consumers receive the most flexible purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Lesotho, Kiribati, Hungary, Iran, Slovenia, Myanmar, Bolivia, Bosnia and Herzegovina, Andorra, Azerbaijan, Botswana, Singapore, El Salvador, Kazakhstan, Mauritius, Ghana, The Gambia, Algeria, Malta, Fiji, Burkina Faso, Iceland, Jordan, Serbia, Brazil, Nigeria, Latvia, Uruguay, Kyrgyzstan, Sweden, Niger, Georgia, Zambia, Jamaica, Slovakia, Macedonia, Cape Verde, Czech Republic, Togo, Tonga, Ukraine. A well-elaborated logistics chains and a partnership network guide us to dispatch our goods anywhere in the globe with no delay without damaging product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of manufacturing equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are happy that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, phone us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |