We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5792625220
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 600 l/min |
Compressed air connection output | Ø 8x1 |
Operational voltage AC at 50 Hz | 24 V |
Operational voltage AC at 60 Hz | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5792625220, get in touch with FAMAGA, the world's leading vendor of industrial equipment. Our company has progressed for more than ten years - these are years of experience, which are symbolized in the quality of products and personalseparate attention to each client. We respect everyone, who joined with us - thus, our regular buyers receive the most attractive purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such customers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA works all over the earth Germany, United Kingdom, Cuba, Ecuador, Nicaragua, Israel, Belarus, Eswatini, Papua New Guinea, Brazil, Tajikistan, Honduras, Nepal, Andorra, Finland, Ukraine, El Salvador, The Bahamas, Paraguay, Uruguay, Mauritania, Luxembourg, Uganda, Rwanda, Costa Rica, Iran, United Arab Emirates, Togo, Jordan, Dominica, Kenya, Georgia, Botswana, Djibouti, Kyrgyzstan, Albania, Seychelles, Cape Verde, Greece, Bangladesh, Vietnam, Sudan, Laos, Croatia, Cyprus, Ireland, Malaysia, Zimbabwe, Tonga. A well-developed logistics system and a partnership network allow us to deliver our goods anywhere in the globe as soon as possible without undermining product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is ascending every day. We are pleased that customers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as stay in control.
To get some advice or order, contact us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 600 l/min |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |