We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822333206
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 125 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822333206, make contact with FAMAGA, the world's key vendor of machine made equipment. Our company has functioned for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each consumer. We admire everyone, who joined with us - hence, our regular consumers obtain the most favorable purchase forms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Sierra Leone, United Arab Emirates, Philippines, Swaziland, Palestine, Indonesia, Vietnam, Belgium, Togo, Yemen, Papua New Guinea, Luxembourg, Paraguay, Burkina Faso, Tunisia, Finland, Tajikistan, Singapore, Zambia, Tonga, Ireland, Costa Rica, Eritrea, South Korea, Egypt, Uruguay, Comoros, Uzbekistan, Panama, El Salvador, Laos, Cyprus, Pakistan, Ukraine, Nepal, Senegal, Jamaica, Iran, Dominica, India, The Gambia, Benin, Croatia, Zimbabwe, Andorra. A well-shaped logistics connection and a partnership network cheer us to dispatch our items anywhere in the world promptly without disreputing product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are pleased that clients choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To request or book, contact us or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |