We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822434203
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822434203, communicate with FAMAGA, the world's prime company of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are described in the quality of merchandises and personalseparate attention to each user. We appreciate everyone, who liased with us - therefore, our regular clients accept the most convenient purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such buyers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Fiji, Costa Rica, Cyprus, Slovenia, The Gambia, Oman, United Arab Emirates, Uruguay, Singapore, Sierra Leone, Mauritania, Eswatini, Burkina Faso, Luxembourg, Latvia, Russia, Morocco, The Bahamas, Swaziland, Ecuador, Mauritius, Vietnam, Georgia, Argentina, Estonia, United States, Senegal, Malaysia, Cameroon, Denmark, Togo, Afghanistan, Niger, Dominica, Slovakia, Botswana, South Korea. A well-elaborated logistics link and a partnership network allow us to conduct our items anywhere in the world immediately without undermining product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To consult or make a request, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |