We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001424
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | ISO 21287 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422001424, contact FAMAGA, the world's influential retailer of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each customer. We praise everyone, who liased with us - so, our regular customers procure the most favorable purchase conditions and discounts on the industrial equipment market. At this time, there are more than 3500 such consumers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Sweden, Guinea-Bissau, Nicaragua, Guyana, Seychelles, Costa Rica, Chad, Oman, Japan, Burundi, Honduras, Botswana, Madagascar, Georgia, Lithuania, Luxembourg, Malawi, United Arab Emirates, Malta, Eritrea, Macedonia, Jordan, Samoa, Armenia, Syria, Burkina Faso, Nepal, Mauritania, Uganda, Latvia, Ecuador, Haiti, Djibouti, Malaysia, Brazil, Cape Verde, South Korea, China, Mali, South Sudan, Sierra Leone, Estonia, The Gambia, Qatar, Israel, Serbia, Pakistan, Kuwait, Benin, Albania, Slovakia. A well-elaborated logistics link and a partnership network allow us to dispatch our goods anywhere in the globe as soon as possible without disreputing product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, phone us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |