We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422703160
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422703160, get in touch with FAMAGA, the world's principle provider of industrialized equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of goods and private attention to each user. We esteem everyone, who collaborated with us - hence, our regular buyers receive the most favorable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Haiti, Papua New Guinea, Angola, Indonesia, Dominican Republic, Azerbaijan, Monaco, South Sudan, North Korea, Netherlands, Mauritania, Nepal, Cyprus, Brazil, Pakistan, Turkmenistan, China, Tanzania, Mongolia, Tonga, Guatemala, Lithuania, Tajikistan, The Bahamas, Mexico, East Timor, Seychelles, Sierra Leone, Kuwait, Cameroon, Nicaragua, Peru, Switzerland, Rwanda, Finland, Afghanistan, Albania, Slovakia, Jamaica, The Gambia, Samoa, Qatar, Bolivia, Austria, Botswana, Egypt, Syria, Belarus, United States, Czech Republic. A well-built logistics series and a partnership network cheer us to dispatch our goods anywhere in the globe as soon as possible without damaging product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only experts, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is rising every day. We are pleased that customers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or make a request, get in touch with us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |