We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822066101
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Stroke | 50 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822066101, reach FAMAGA, the world's top company of mechanized equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of outputs and individual attention to each orderer. We appreciate everyone, who worked with us - therefore, our regular buyers get the most acceptable purchase forms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly compose new agreements. More than 750 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, South Africa, Grenada, Tonga, New Zealand, Jamaica, Belize, Cameroon, Switzerland, Azerbaijan, Libya, Sudan, Macedonia, Poland, Slovakia, The Gambia, Zambia, Cape Verde, Burma, Chad, Benin, Bolivia, Kyrgyzstan, Guatemala, Uzbekistan, Burundi, Turkey, Netherlands, Bulgaria, Liechtenstein, Bangladesh, United Arab Emirates, Antigua and Barbuda, Argentina, Nigeria, Latvia, Brazil, Thailand, Moldova, Seychelles, Eswatini, Andorra, Niger, Ukraine, Iceland, Swaziland, Chile, Czech Republic, Bosnia and Herzegovina, Paraguay, Israel, Indonesia. A well-developed logistics chains and a partnership network assist us to conduct our units anywhere in the world on-time without compromising product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, get in touch with us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |