We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R412019834 (SSI-DA-032-0015-4-02-2-000-000) AVENTICS - Kurzhubzylinder, Serie SSI
Part number
R412019834
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412019834 (SSI-DA-032-0015-4-02-2-000-000) AVENTICS - Kurzhubzylinder, Serie SSI R412019834, make contact with FAMAGA, the world's chief vendor of streamlined equipment. Our company has functioned for more than ten years - these are ages of experience, which are portrayed in the quality of goods and individual attention to each purchaser. We praise everyone, who liased with us - thus, our regular buyers procure the most convenient purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such buyers, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Norway, Niger, Romania, Malawi, Benin, Zambia, Nicaragua, Argentina, Poland, Mongolia, Papua New Guinea, Japan, Libya, Tajikistan, Sudan, Pakistan, Turkey, Afghanistan, Macedonia, Suriname, Mozambique, Bosnia and Herzegovina, Syria, Armenia, Togo, Ecuador, Iceland, Burkina Faso, Mali, Uruguay, Ghana, Belize, Uganda, Croatia, Central African Republic, Azerbaijan, Hungary, Slovakia, Bangladesh, Czech Republic, Montenegro, Equatorial Guinea, Angola, Lithuania, Jamaica, Iraq, Denmark. A well-shaped logistics network and a partnership network guide us to deliver our goods anywhere in the planet on-time without discrediting product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is increasing every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To inquire or make a request, contact us or send a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |