We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226620800
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 80 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5226620800, get in touch with FAMAGA, the world's major producer of factory-made equipment. Our company has advanced for more than ten years - these are cycles of experience, which are represented in the quality of spare parts and personalseparate attention to each consumer. We appreciate everyone, who liased with us - therefore, our regular purchasers accept the most convenient purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Azerbaijan, Czech Republic, Equatorial Guinea, Liberia, Togo, Macedonia, The Bahamas, Dominica, Iran, Peru, Uganda, France, Turkey, Qatar, Cape Verde, Burma, Tunisia, Suriname, Turkmenistan, Saudi Arabia, Austria, Antigua and Barbuda, Eswatini, Malawi, Montenegro, Mexico, Lithuania, Senegal, Tajikistan, Uruguay, Panama, Jordan, Egypt, Kenya, Zambia, Sierra Leone, Algeria, India, Angola, Tonga, Mongolia, Botswana, Australia, Ireland, Greece, Israel. A well-developed logistics chains and a partnership network let us to deliver our goods anywhere in the world promptly without compromising product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or book, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |