We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822033201
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 10 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822033201, communicate with FAMAGA, the world's prime retailer of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of products and individual attention to each customer. We value everyone, who conspired with us - therefore, our regular customers procure the most favorable purchase forms and discounts on the factory-made equipment market. Today, there are more than 4000 such customers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Oman, Argentina, Kuwait, Botswana, Bhutan, Moldova, India, Iraq, Malta, Lebanon, Malaysia, Tunisia, Uruguay, Liechtenstein, Japan, Kyrgyzstan, Croatia, Ukraine, The Bahamas, Armenia, Switzerland, Australia, Mauritius, Angola, Gambia, Iceland, Norway, Greece, Mali, Poland, Denmark, Andorra, Slovakia, Kiribati, Zambia, Suriname, Czech Republic, Tonga, Thailand, Montenegro, Syria. A advanced logistics connection and a partnership network assist us to conduct our goods anywhere in the planet on-time without undermining product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |