We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822491202
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M10x1,25 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822491202, contact FAMAGA, the world's foremost retailer of mechanized equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of goods and individual attention to each orderer. We cherish everyone, who engaged with us - thus, our regular clients pick up the most desirable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4500 such buyers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Fiji, Czech Republic, Haiti, Poland, Azerbaijan, Libya, Namibia, Oman, Macedonia, China, Kenya, Colombia, North Korea, The Gambia, Turkey, Grenada, Djibouti, Lithuania, Jamaica, Argentina, Albania, Sierra Leone, Uzbekistan, United Arab Emirates, Tunisia, Brazil, Laos, Israel, Rwanda, Yemen, Nigeria, Armenia, Kazakhstan, Mali, Chile, Belize, Thailand, India, Algeria, Uganda, Malta. A well-shaped logistics network and a partnership network let us to conduct our goods anywhere in the globe as soon as possible without undermining product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |