We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822063131
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Stroke | 160 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822063131, call FAMAGA, the world's top company of manufacturing equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each buyer. We value everyone, who collaborated with us - thus, our regular buyers receive the most favorable purchase terms and discounts on the manufacturing equipment market. Now, there are more than 4500 such customers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Mali, Dominican Republic, Botswana, Colombia, Tunisia, Mauritius, Malaysia, The Gambia, Indonesia, Papua New Guinea, Senegal, Latvia, Kenya, South Korea, Niger, Cape Verde, Bulgaria, Dominica, Chile, Costa Rica, Uruguay, China, Kiribati, Angola, Bolivia, Paraguay, Mauritania, Zimbabwe, Suriname, Cyprus, South Sudan, India, United Arab Emirates, Kuwait, Swaziland, Qatar, East Timor, El Salvador, United States, Djibouti, Laos, Yemen, Namibia, Finland, Burkina Faso. A well-developed logistics chains and a partnership network allow us to send our units anywhere in the world with no delay without disreputing product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All outcomes from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are glad that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or order, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |