We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R422001014 (CCI-DA-025-0010-00412241100002) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI
Part number
R422001014
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R422001014 (CCI-DA-025-0010-00412241100002) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI R422001014, make contact with FAMAGA, the world's top provider of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and special attention to each buyer. We admire everyone, who worked with us - therefore, our regular buyers obtain the most flexible purchase terms and discounts on the manufacturing equipment market. Now, there are more than 4000 such clients, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Malaysia, Tonga, Oman, East Timor, Equatorial Guinea, Uzbekistan, Burma, Nigeria, Macedonia, Haiti, Liechtenstein, Saudi Arabia, Slovenia, Brazil, Central African Republic, Namibia, Eritrea, Uganda, Malta, Angola, Yemen, Zambia, Paraguay, Greece, Kuwait, Fiji, Armenia, Poland, Mali, Senegal, Moldova, Mexico, Ukraine, Libya, Lithuania, Slovakia, Belize, Iran, Sudan, Iceland, The Gambia, Iraq, Tanzania. A well-shaped logistics bond and a partnership network let us to send our units anywhere in the globe on-time without damaging product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only experts, who already have experience in the range of machine made streamlined equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is rising every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or book, get in touch with us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |