We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471323563
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 100 mm |
Piston rod thread | M27x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 350 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7471323563, reach FAMAGA, the world's the best supplier of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are symbolized in the quality of products and special attention to each consumer. We admire everyone, who collaborated with us - so, our regular customers accept the most acceptable purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4500 such customers, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, United States, Morocco, Suriname, Netherlands, Macedonia, Ecuador, Afghanistan, Italy, Canada, Colombia, Argentina, Swaziland, South Korea, Belarus, Croatia, Botswana, Fiji, Kiribati, Yemen, Mauritius, Mozambique, Eritrea, Pakistan, Djibouti, Paraguay, Egypt, Zimbabwe, Dominica, Bolivia, Qatar, Hungary, Brunei, Kazakhstan, China, Cape Verde, Madagascar, Ireland, Seychelles, Malaysia, Costa Rica, Cameroon, Guatemala, Kenya, Vietnam, Samoa. A well-shaped logistics bond and a partnership network let us to conduct our products anywhere in the globe quickly without compromising product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is rising every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as stay in control.
To consult or order, get in touch with us or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |