We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177284
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 254 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/2 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480177284, make contact with FAMAGA, the world's prime retailer of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and private attention to each user. We praise everyone, who conspired with us - therefore, our regular consumers procure the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such clients, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the earth Germany, United Kingdom, Tonga, Papua New Guinea, Swaziland, Malawi, Ukraine, Kazakhstan, Dominican Republic, Rwanda, Grenada, El Salvador, Bhutan, Slovakia, Afghanistan, Paraguay, Switzerland, Burkina Faso, Malta, India, Mauritius, Liberia, Kuwait, Madagascar, Brazil, Turkey, North Korea, Guatemala, Greece, Uruguay, Ghana, Ecuador, Iran, Fiji, Seychelles, Jordan, Suriname, Bosnia and Herzegovina, Ireland, Nigeria, Argentina, Bangladesh, Czech Republic, Kyrgyzstan, Morocco. A well-shaped logistics system and a partnership network allow us to ship our units anywhere in the globe as soon as possible without disreputing product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To ask a question or book, contact us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |