We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637856
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | ISO 15524 |
Stroke | 50 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480637856, contact FAMAGA, the world's principle producer of manufacturing equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and special attention to each consumer. We appreciate everyone, who engaged with us - thus, our regular buyers accept the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such customers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Australia, Honduras, Bhutan, Sudan, Afghanistan, Botswana, Andorra, Tonga, Belgium, Cameroon, Burundi, Fiji, Liechtenstein, Thailand, The Bahamas, Kazakhstan, Guinea, Bangladesh, Luxembourg, Bolivia, Austria, North Korea, Kiribati, Turkmenistan, Togo, Antigua and Barbuda, Argentina, Morocco, Senegal, Qatar, Tunisia, Zambia, Bulgaria, Mongolia, Finland, New Zealand, Seychelles, Iran, Estonia, Denmark, Nigeria, Turkey, Niger, Brunei. A well-built logistics link and a partnership network guide us to dispatch our units anywhere in the earth on-time without discrediting product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To consult or book, contact us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |