We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226612000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5226612000, make contact with FAMAGA, the world's chief vendor of machine made equipment. Our company has operated for more than ten years - these are cycles of experience, which are symbolized in the quality of goods and private attention to each purchaser. We respect everyone, who engaged with us - thus, our regular buyers pick up the most beneficial purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 600 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Namibia, Colombia, Cyprus, Switzerland, Nicaragua, Burma, Montenegro, Laos, Netherlands, Bahamas, Argentina, Thailand, Swaziland, Kuwait, Senegal, Mexico, Malta, Burkina Faso, Hungary, Jamaica, Djibouti, Fiji, Qatar, South Korea, Guatemala, Monaco, Zimbabwe, Zambia, Indonesia, Georgia, Mauritius, Tonga, Bangladesh, United Arab Emirates, Finland, Algeria, Morocco, Jordan, Egypt, Armenia, Serbia, Mozambique. A well-shaped logistics bond and a partnership network let us to dispatch our goods anywhere in the globe promptly without damaging product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as stay in control.
To ask a question or book, phone us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |