We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000243
Description
Functional principle | double-acting |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Stroke | 35 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R402000243, catch up with FAMAGA, the world's the best company of mechanized equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and personalseparate attention to each orderer. We understand everyone, who collaborated with us - therefore, our regular clients receive the most desirable purchase forms and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Saudi Arabia, Rwanda, Bosnia and Herzegovina, Lesotho, Mozambique, Botswana, Grenada, Norway, Chad, Moldova, Chile, Iceland, Gambia, Serbia, South Sudan, Greece, Pakistan, Laos, India, Ecuador, Costa Rica, Sudan, Nicaragua, Iran, Belize, Sierra Leone, Cape Verde, Bulgaria, Tonga, Malta, South Korea, Brazil, Bangladesh, Zimbabwe, Czech Republic, Ghana, Denmark, El Salvador, Thailand, Austria, Dominica, Zambia, Eswatini, Kenya, Guatemala. A well-shaped logistics link and a partnership network assist us to deliver our units anywhere in the world on-time without damaging product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To inquire or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 0 ... 65 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |