We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822066100
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Stroke | 25 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822066100, catch up with FAMAGA, the world's influential vendor of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are outlined in the quality of spare parts and particular attention to each orderer. We praise everyone, who liased with us - so, our regular purchasers procure the most desirable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, The Bahamas, Comoros, Cambodia, Bahamas, Austria, Brazil, Japan, Djibouti, Guyana, Mauritania, Poland, Finland, Fiji, Lithuania, Jordan, United States, Moldova, Pakistan, Serbia, Singapore, The Gambia, Bosnia and Herzegovina, Zimbabwe, Belize, Sweden, Georgia, Monaco, Mongolia, Kuwait, United Arab Emirates, Cyprus, Libya, Belarus, Haiti, South Sudan, Afghanistan, Yemen, Switzerland, Tunisia, Suriname, Indonesia, Equatorial Guinea, Botswana, Bolivia, China, Hungary. A well-shaped logistics network and a partnership network allow us to deliver our goods anywhere in the globe on-time without undermining product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To request or book, contact us or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |