We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480143254
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480143254, contact FAMAGA, the world's principle vendor of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of products and personalseparate attention to each consumer. We appreciate everyone, who engaged with us - thus, our regular buyers bring in the most beneficial purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, El Salvador, Brunei, Palestine, Oman, Turkey, Rwanda, South Sudan, Peru, Angola, Seychelles, Latvia, Ireland, Georgia, Brazil, Tonga, Burkina Faso, Israel, Egypt, Botswana, The Bahamas, Qatar, Monaco, Malta, Haiti, Cyprus, Russia, Namibia, Syria, China, Togo, Bulgaria, Comoros, Ecuador, Jamaica, Swaziland, Sweden, Estonia, Denmark, Costa Rica, Morocco, The Gambia, Mauritania, Luxembourg, Albania, Paraguay. A well-elaborated logistics link and a partnership network allow us to send our units anywhere in the planet as soon as possible without discrediting product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |