We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013739
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412013739, call FAMAGA, the world's dominant company of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are symbolized in the quality of merchandises and special attention to each client. We value everyone, who worked with us - hence, our regular consumers receive the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly make new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, United Arab Emirates, Mauritius, Gambia, Algeria, Italy, Turkey, Cyprus, Mauritania, Vietnam, Nepal, Myanmar, Dominica, Mexico, Bolivia, Austria, Armenia, Brunei, Senegal, Latvia, Mozambique, Philippines, Estonia, Jamaica, Kiribati, Luxembourg, Panama, Czech Republic, Liechtenstein, Guyana, Benin, Pakistan, Sudan, Morocco, Denmark, South Sudan, Togo, Haiti, Belize, Ireland, Iceland, North Korea, El Salvador, Switzerland, Madagascar, Guatemala, Belarus, New Zealand. A well-developed logistics connection and a partnership network guide us to dispatch our goods anywhere in the earth quickly without disreputing product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To ask a question or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |