We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822245409
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822245409, call FAMAGA, the world's key vendor of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each consumer. We esteem everyone, who worked with us - thus, our regular purchasers receive the most favorable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Switzerland, Haiti, Turkmenistan, Sierra Leone, Cuba, Iran, United Arab Emirates, Burkina Faso, Bolivia, Suriname, Belgium, East Timor, Latvia, Djibouti, Ghana, Iceland, Swaziland, Thailand, Indonesia, Comoros, Malaysia, Serbia, Croatia, Armenia, Peru, Vietnam, Paraguay, Ecuador, Fiji, Ireland, Benin, Algeria, Sweden, Tanzania, El Salvador, China, Tajikistan, Jordan, Egypt, Laos, Andorra, The Gambia, Togo, Brunei, Mauritania, South Korea, Central African Republic. A well-elaborated logistics bond and a partnership network let us to ship our units anywhere in the world quickly without compromising product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of industrial equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To inquire or order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |