We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472408250
Description
| Functional principle | double-acting |
| Cushioning | pneumatically |
| adjustable | |
| Magnetic piston | with magnetic piston |
| Piston diameter | 100 mm |
| Piston rod thread | M27x2 |
| Standardization | CNOMO / NFE 49-001 |
| Stroke | 50 mm |
| Sealing material | Polyurethane |
| Compressed air connection | G 1/2 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) 7472408250, communicate with FAMAGA, the world's major distributor of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of items and special attention to each customer. We respect everyone, who cooperated with us - therefore, our regular purchasers receive the most attractive purchase forms and discounts on the industrial equipment market. At this time, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Iceland, Lesotho, Georgia, Bhutan, Mauritius, Armenia, Kazakhstan, Mongolia, Iraq, Netherlands, Myanmar, Australia, Zambia, Morocco, Benin, Bangladesh, East Timor, Uruguay, Turkey, Ukraine, Argentina, Kenya, Pakistan, Moldova, Nigeria, Swaziland, Croatia, Cameroon, Kyrgyzstan, Israel, Ecuador, Sierra Leone, Estonia, Tonga, Lithuania, Tunisia, Cyprus, Libya, Ireland, Djibouti, Denmark, Laos, Central African Republic, Paraguay, Ghana, Tajikistan. A advanced logistics system and a partnership network let us to ship our items anywhere in the planet immediately without damaging product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this amount is rising every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as stay in control.
To request or make a request, call us by phone or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| Standards | CNOMO / NFE 49-001 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 2 ... 10 bar |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| You will find the order key and all valid configurations (customer information) in the Media Centre. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Aluminum |
| End cover | Aluminum |
| Seal | Polyurethane |
| Nut for piston rod | Steel, galvanized |
| Tie-rods | Stainless steel |
