We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822331223
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 320 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822331223, catch up with FAMAGA, the world's key producer of manufacturing equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and special attention to each purchaser. We understand everyone, who worked with us - hence, our regular buyers procure the most convenient purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4000 such customers, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Uruguay, Burkina Faso, Burma, Nigeria, Australia, Eritrea, Chad, Central African Republic, Andorra, Albania, Kenya, Bangladesh, Zimbabwe, Eswatini, Qatar, Tunisia, Senegal, Sierra Leone, Jordan, The Gambia, Bulgaria, Costa Rica, Bosnia and Herzegovina, New Zealand, Denmark, Malta, Mozambique, Rwanda, Angola, Belize, Brazil, Greece, Morocco, Libya, Sudan, Israel, Mexico, Tonga, Ecuador, Norway, Swaziland, Austria, Uganda, Lithuania, Vietnam, Macedonia, Chile. A well-elaborated logistics connection and a partnership network guide us to deliver our elements anywhere in the planet immediately without compromising product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are happy that clients choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as to stay on the top.
To consult or place an order, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |