We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480176685
Description
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | 1-14 UNF |
Stroke | 25.4 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/2 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480176685, reach FAMAGA, the world's foremost distributor of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of spare parts and private attention to each orderer. We admire everyone, who engaged with us - therefore, our regular buyers bring in the most helpful purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such customers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Bhutan, Kenya, The Bahamas, Burundi, Honduras, Slovakia, Algeria, Poland, Liberia, Tonga, Yemen, Malawi, Grenada, Kazakhstan, Netherlands, Gambia, Thailand, El Salvador, Mozambique, Uzbekistan, Turkmenistan, Libya, Mauritius, Turkey, Croatia, Antigua and Barbuda, Israel, Hungary, Belize, Ecuador, Ireland, Greece, New Zealand, Paraguay, Costa Rica, Kyrgyzstan, Ghana, Eswatini, The Gambia, Kiribati, Uruguay, Senegal, Zimbabwe, Brazil, Armenia, Laos, Mexico. A well-shaped logistics bond and a partnership network allow us to ship our elements anywhere in the globe on-time without discrediting product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as to stay on the top.
To ask a question or book, contact us or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |