We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821301702
Description
Parts | Micro oil-mist lubricator |
Type of filling | Manual oil filling |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 1000 l/min |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0821301702, connect FAMAGA, the world's central provider of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are illustrated in the quality of merchandises and special attention to each buyer. We esteem everyone, who collaborated with us - therefore, our regular consumers obtain the most attractive purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such consumers, and we constantly sign new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the earth Germany, United Kingdom, Australia, Eritrea, Colombia, France, Malawi, Cambodia, Mali, Central African Republic, Czech Republic, Algeria, Tunisia, Bosnia and Herzegovina, Norway, India, Liechtenstein, Namibia, Andorra, Burkina Faso, Chile, Jamaica, Panama, Iceland, Rwanda, Yemen, Paraguay, The Gambia, Kyrgyzstan, Libya, Tonga, Denmark, Madagascar, Kazakhstan, Philippines, Azerbaijan, Armenia, Jordan, United Arab Emirates, Bulgaria, Comoros, Equatorial Guinea, Belarus, Niger, Thailand, Laos, Bolivia, Mongolia, Ghana. A well-elaborated logistics chains and a partnership network allow us to send our goods anywhere in the planet immediately without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this number is ascending every day. We are proud that clients choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or place an order, phone us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Micro oil-mist lubricator, Can be assembled into blocks |
Parts | Micro oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 35 cm³ |
Type of filling | Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Only approx. 10% of the preset drip quantity enters the compressed air system. oil filling not possible during operation. Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 10-20 drops |
Material |
---|
Housing | Die cast zinc |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |