We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5725550220
Description
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Aluminum,Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Connector standard | EN 175301-803:2006 |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | EN 175301-803, form A |
Type | Plug |
Nominal flow Qn | 4100 l/min |
Compressed air connection input | G 1/2 |
Compressed air connection output | G 1/2 |
DC operating voltage | 24 V |
Activation | Electrically |
Temperature resistance | -25 °C cold-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5725550220, connect FAMAGA, the world's the best distributor of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are symbolized in the quality of products and individual attention to each buyer. We cherish everyone, who conspired with us - hence, our regular clients pick up the most helpful purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4500 such consumers, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Swaziland, Czech Republic, Turkey, Botswana, Switzerland, Belgium, Burkina Faso, Bosnia and Herzegovina, Palestine, Netherlands, Uganda, Vietnam, Malawi, Kiribati, Macedonia, Guinea, Gambia, Niger, Malta, Peru, Tonga, Zimbabwe, Pakistan, Argentina, Fiji, Belize, Chile, Liechtenstein, Bangladesh, United Arab Emirates, Iraq, Cameroon, Libya, Hungary, Uruguay, Moldova, Namibia, Indonesia, Tanzania, Nigeria, Afghanistan. A well-built logistics series and a partnership network cheer us to conduct our products anywhere in the earth promptly without undermining product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as to stay on the top.
To get some advice or place an order, call us by phone or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | See table |
Medium temperature min./max. | See table |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 4100 l/min |
Compressed air connection | according to ISO 228-1 |
Pilot control exhaust | with directional pilot air exhaust |
Connector standard | EN 175301-803:2006 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | See table |
Duty cycle | 100 % |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. *Note: Basic valves feature a maximum working pressure of 16 bar. When combined with standard CNOMO pilots, the maximum working pressure is 10 bar. |
Material |
---|
Housing | Aluminum Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |