We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472407308
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7472407308, contact FAMAGA, the world's top retailer of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of products and personalseparate attention to each buyer. We cherish everyone, who worked with us - thus, our regular clients obtain the most helpful purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Palestine, Sierra Leone, Cuba, Morocco, Zimbabwe, Libya, Greece, Colombia, Nicaragua, Turkey, Monaco, Guyana, Tunisia, Grenada, Lithuania, United States, Benin, Russia, Croatia, Madagascar, Cape Verde, Hungary, Luxembourg, Czech Republic, Mexico, Denmark, Vietnam, Brunei, Cyprus, Zambia, Malaysia, China, Suriname, Yemen, The Gambia, Afghanistan, Comoros, Equatorial Guinea, Finland, Egypt, Uganda. A advanced logistics bond and a partnership network allow us to conduct our units anywhere in the earth as soon as possible without compromising product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the field of machine made streamlined equipment.
All merchandises from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |