We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822062002
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Stroke | 30 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822062002, connect FAMAGA, the world's key company of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and particular attention to each consumer. We understand everyone, who collaborated with us - therefore, our regular clients pick up the most convenient purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Panama, Tonga, Uzbekistan, Japan, Jordan, Romania, Palestine, Bhutan, Sweden, Tanzania, Iceland, Guatemala, Djibouti, Suriname, Sudan, Bangladesh, Mali, Chile, Gambia, South Sudan, Bulgaria, Malawi, Turkey, The Gambia, Liechtenstein, Belize, Poland, Libya, North Korea, Rwanda, Morocco, Hungary, Montenegro, Macedonia, United Arab Emirates, Moldova, Malaysia, Malta, Zambia, New Zealand, Iraq, Laos. A well-shaped logistics bond and a partnership network guide us to deliver our items anywhere in the world promptly without undermining product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |